Sales: 602.714.8500
Support: 602.903.7271
Support: 602.903.7271
Feature Specifications |
|
Ethernet Ports |
2 RJ45 (LAN/WAN) |
NAT/Router |
Yes |
DHCP |
Client/Server |
FXS Port |
2 |
FXO Port |
No |
I |
|
PSTN Pass-through Port |
No |
Voice Mail Indicator |
Yes |
Voice Codec |
G.711(a/u-Law) |
Remote Configuration |
TFTP/HTTP |
Technical Specifications |
|
Telephone Interfaces |
2 FXS ports, 2 SIP accounts |
Network Interface |
Two (2) 10M/100 Mbps, RJ-45 |
LED Indicators |
Power, WAN, LAN, PHONE1 and PHONE2 |
Reset Button |
Factory Reset button |
Voice-Over Packet |
Voice Activity Detection (VAD) with CNG (comfort noise generation) and PLC (packet loss concealment), Capabilities Dynamic Jitter Buffer, Modem detection & auto-switch to G.711, Packetized Voice Protocol Unit (supports RTP/RTCP and AAL2 protocol), G.168 compliant Echo Cancellation, LEC (line echo cancellation) with NLP |
DHCP Server/Client |
Yes, NAT Router or Switched Mode |
Fax over IP |
G.711 for fax pass-through |
QoS |
Diffserv, ToS, 802.1 P/Q VLAN tagging |
IP Transport |
RTP/RTCP |
DTMF Method |
RFC2833 |
IP Signaling |
SIP (RFC 3261) |
Provisioning |
TFTP, HTTP, HTTPS (pending) |
Management |
Auto provisioning system Support Layer 2 (802.1Q, VLAN, 802.1p), Layer 3 QoS (Tos, DiffServ, MPLS) |
Power Output |
12VDC, 0.5A / Input: 100-240 VAC/50-60 Hz |
Environmental Operational |
32°-104°F or 0°-40°C |
Storage |
10°-130°F / Humidity: 10-90% Non-condensing |
Dimensions (H x W x D) |
25mm x 115mm x 75mm (when laid flat) ; 115mm x 25mm x 75mm (standing up) |
Short & long haul |
REN3: Up to150 ft on 24 AWG line |
Call Handling Features |
Caller ID display or block, Call waiting caller ID, Call waiting/flash, Call transfer, hold, forward, 3-way conferencing |
Caller ID |
Bellcore Type 1 & 2 |
EMC |
EN55022/EN55024 and FCC part15 Class B |
Safety |
UL |
Copyright © 2011 Crexendo, Inc. All rights reserved.
